摩擦过程中真实接触面积的灰色分析

灰色系统理论是近几年以随机过程为研究对象而形成和发展起来的，在农业和自动控制等方面的研究与应用发展较快．为了使这种理论应用于摩擦学研究领域，从光全反射测量和计算机数值计算两方面，考察了粗糙表面接触时真实接触面积的随机特性，指出摩擦过程中的真实接触面积是一种含有随机成分的变化量，研究目标应当侧重于真实接触面积的变化趋势和范围，而不是它的精确解．在此基础上，首次利用灰色系统理论，分别对静态和动态接触条件下真实接触面积的变化规律进行了灰色分析，建立了精度比较高的预测真实接触面积的灰色模型ＣＭ（１，１）．这种模型对动、静接触面积的计算值与实测值具有良好的一致性，可以用于动态跟踪描述摩擦过程中真实接触面积的变化规律     

Brownian Dynamics simulation of reversible polymeric networks

In this paper we describe the construction of a Brownian Dynamics simulation of reversibly cross-linked networks. The simulation differs from existing analytical approaches and computer simulations of networks in the sense that we also take the topology of the network into account. The motion of the junction points between different molecules is not prescribed but is calculated from a force balance. This makes it possible to measure the effect of network reorganisations on the stress relaxation. The response of networks to shear flow is measured and analysed in terms of transient network theory and within the framework of linear viscoelasticity. It is shown that the average motion of the junction is affine but that there is a long time diffusive process around the affine path. It was found that, even in systems with Gaussian chains and fixed association and disociation rates, a shear thickening of the viscosity and primary normal stress coefficient can occur. The reason was found to be that dangling segments are recaptured by the network before they had the opportunity to fully relax to the equilibrium state where the probability of reattachment to the network increases linearly with the length of a segment. Due to this mechanism the fraction of long segments present in the network is increased. This explanation of shear thickening seems to be consistent with experimental findings.     

The flip side of buckling

Buckling of slender structures under compressive loading is a failure of infinitesimal stability due to a confluence of two factors: the energy density non-convexity and the smallness of Korn’s constant. The problem has been well understood only for bodies with simple geometries when the slenderness parameter is well defined. In this paper, we present the first rigorous analysis of buckling for bodies with complex geometry. By limiting our analysis to the “near-flip” instability, we address the universal features of the buckling phenomenon that depend on neither the shape of the domain nor the degree of constitutive nonlinearity of the elastic material.      

DYNAMIC MODELING AND STABILITY CONTROL OF FOLDING WING AIRCRAFT 1)

折叠翼飞行器在变形过程中,其动力学模型呈现多刚体、多自由度和强非线性特点,同时气动力/力矩、压心、质心和转动惯量等参数也会大幅度变化,严重影响飞行稳定性. 由此,本论文将对飞行器的多刚体动力学建模与变形稳定控制进行研究.基于凯恩方法建立了折叠翼飞行器的多刚体动力学模型,并从中得到了变形所产生的附加力和力矩表达式.通过气动计算拟合出气动参数与折叠角之间的函数关系,由此分析了不同折叠角速度下飞行器的纵向动态特性, 结果表明,折叠翼飞行器变形过程中速度、高度和俯仰角均会发生变化,飞行器无法保持稳定飞行.为此提出了一种基于自抗扰理论的飞行器变形过程中的稳定控制方法.将折叠翼飞行器纵向非线性动力学模型中存在的非线性项、耦合项以及参数时变项都视为系统内外总扰动,利用扩张状态观测器对总扰动进行实时估计和补偿, 针对补偿后的系统设计PD控制器,实现了速度通道和高度通道的解耦控制.通过Lyapunov稳定性原理证明了系统的稳定性, 并进行数学仿真验证. 仿真结果表明,基于自抗扰理论设计的稳定控制器能够解决飞行器变形所带来的强非线性和参数时变等问题,保证飞行器的高精度稳定控制.     

Thermocapillary convection in an absorbing-scattering medium subjected to irradiation

The criteria for the onset of thermocapillary convection in a horizontal radiating fluid layer heated by an incident thermal radiative energy source are determined. The fluid layer is an absorbing and isotropically scattering medium confined between a free upper surface and an insulated rigid lower surface. Linear analysis is performed on the continuity, momentum, energy, and approximate radiative equations. The resulting disturbance equations are solved using a numerical optimization technique to obtain the eigenvalues governing the onset of convective motion. The influence of thermal radiation on the critical Marangoni number is examined. Attention is drawn to the physical significance of the heat transfer mode, gravitational force, the scattering effect, and the surface radiative properties. The conditions leading to the onset of convection are presented as functions of the optical thickness, scattering albedo, Planck number, surface emissivities, and transmissivities.     

薄板稳定问题的边界元法

本文基于小挠度薄板弯曲问题的基本解,建立了求解薄板稳定问题的边界积分方程,并计算了若干算例,结果表明用边界元法求解薄板的稳定问题是行之有效的.     

树枝状界面相开裂对纤维强度的影响

碳纤维增强铝的复合材料在制造过程中，由于发生化学反应而在界面上形成新相。该相并非均匀附着在纤维表面，而是以纤维为主杆形成树枝状。本文利用剪切滞后理论，同时考虑到界面相亦有承受轴向外载的能力，分析了界面相开裂对纤维强度的影响。结果表明界面相与纤维间界面强度以及该界面脱粘后的摩擦应力的增加都能使纤维在给定外载下破坏的概率减小；另外界面相的厚度、沿纤维方向的弹性模量、剪切模量的增加却使上述概率增加。     

关于具有激波的流动的稳定性

<正> 1、引言 流体运动总是同时受动力学和热力学规律的约制,通常处理流动问题时这两方面的考虑也总是交织在一起,例如,为了定义描述流动现象的诸流动变量,首先要假定每个流体质点微团是处于热力学平衡态,即假定流动系统满足“局域热平衡”条件。这样才可以定义各“点”的压力、密度、熵等变量。由于流动系统同时又是一个热力学系统,因此它的